EM Acoustics EMS-81X User Manual download pdf (Page 9)

EMS-81X User Manual

www.emacoustics.co.uk

Attachment of the FC-81Xv vertical flying cradle

Using the supplied M8 hexagon head bolts, align the mounting holes in the

inner yoke with the mounting points on the top or the bottom of the

enclosure. Ensure that both the flat and spring washers are used – the flat

washer should be in contact with the cradle. Tighten the bolts to ensure a

solid fit. Once the desired angle of the loudspeaker is set, tighten the knobs

on the cradle to lock the position in place. The bracket allows for complete

rotation of the loudspeaker if required. The points on the top of the flying

cradle can be used for permanent installations or to secure a hook clamp.

Ensure that an M8 eyebolt is secured to the rear point on the EMS-81X

enclosure to use as a secondary safety.

Attachment of the FC-81Xh horizontal flying cradle

Using the supplied M8 countersunk socket head bolts, align the

mounting holes in the end mounts of the yoke with the mounting

points on the top and the bottom of the enclosure. Tighten the

bolts to ensure a solid fit. Once the desired angle of the

loudspeaker is set, tighten the knobs on the cradle to lock the

position in place. The bracket allows for complete rotation of the

loudspeaker if required. The points on the top of the flying cradle

can be used for permanent installations or to secure a hook

clamp. Ensure that an M8 eyebolt is secured to the rear point on

the EMS-81X enclosure to use as a secondary safety.

Assembly of clusters using the DFB-81 flyplate set

Using the supplied M8 hexagon head bolts, bolt through the DFB-

81 plate into the enclosure. Ensure that both the flat and spring

washers are used – the flat washer should be in contact with the

plate. Once the desired angles of the loudspeakers are set,

tighten the bolts to lock in place. Then turn the cluster over and

repeat the process on the bottom. Use the rear points on the

EMS-81X enclosures, or the M10 holes on the DFB plates to use

as a secondary safety.

1 2 3 4 5 6 7 8 9 10 11 12 13

No comments

EM Acoustics EMS-81X User Manual Page 9